If the water meter does not respond to the water supply:
If the water meter does not respond to watering, it may need to be vented. To do this, proceed as follows;
- Carefully remove the clear cap from the green tube.
- Remove the blue stick. This will bleed your water meter.
- Place the stick back into the green tube.
- Close it with the transparent cap.
If the water meter does not respond after bleeding:
If the first four steps don't work, it's a good idea to add one more step:
I recommend first removing all the water from the hydropot. You do this by removing the black rubber cap on the side, so that the water can drain away. Make sure that the plant is in a place where the water can drain away. Then push the rubber cap back into the hole.
Then bleed the water meter. To do this, proceed as follows:
1. Remove the clear cap from the green tube.
2. Carefully remove the blue rod and carefully clean and dry it with a cloth. This will bleed your water meter.
3. Place the stick back into the green tube.
4. Close it with the transparent cap.
5. Then pour 1 to 1.5 liters of water over the volcanic granules.
6. After about 30 seconds, the blue stick will respond to the water and rise.
If the water meter does not respond after the above two options:
Check if there is anything blocking the water meter in the pipe, such as a root or a small stone. If there is something in there, it needs to be removed.
Have you tried all the options?
Replace the hydropot with water meter or contact the point of sale where you purchased the plant.
If you bought the plant on our webshop, please contact us and mention your order number. Send a Whatsapp message or send an email to info@beautanic.nl .